Fence Calculator
Important
This calculator provides estimates based on standard assumptions. Always add a wastage allowance (5-10%) and consult a professional for precise project requirements.
Estimate the number of fence panels, posts, and total material cost needed based on the total perimeter length of your yard or property.
How to use the Fence Calculator
- Measure the total fence length along the boundary.
- Enter the panel width in the same unit.
- Enter the cost per panel and per post.
- Click Calculate to get quantities and total cost.
Formula used
Worked example
50 m boundary with 2.5 m panels
Panels = 50 ÷ 2.5 = 20
Posts = 21
At ₹1,800 per panel and ₹600 per post: 36,000 + 12,600 = ₹48,600
Planning a fence
A straight run needs one more post than panels; every corner, end or gate adds extra posts and fittings. Chain-link and barbed-wire fences are priced per running metre or foot instead of per panel, so set the panel width to 1 and use the price per metre. Add 5–10% extra material for cuts and wastage, and check the plot boundary with your property documents before digging.
Tips for accurate results
- Keep length and panel width in the same unit.
- Add separate gate costs.
- Concrete for post footings is an extra cost.
Frequently Asked Questions
For a straight run, panels plus one; add one for each corner.
Typically 2–3 m (6–10 ft), set by the panel width.
Measure each straight side and add them together.
Related Calculators
Content reviewed by Vinod, Easy Smart Calculator · Last updated October 2026
Frequently Asked Questions
How many fence posts do I need?
You typically need one more post than the number of panels, since each panel connects to two posts and posts are shared between adjacent panels.
How much extra material should I buy?
It's recommended to add 5-10% extra material to account for corners, gates, cutting waste, and potential damage during installation.
What factors affect fencing cost?
Fencing cost depends on material type (wood, vinyl, metal), fence height, terrain difficulty, labor costs, and any gates or special features needed.